-
J
Johnwayne lifeinthefastlens Johnwayne wrote on lifeinthefastlens's profile.
Hi,she hasnt advertised the car anywhere as they are in Sardinia for a few weeks.Not sure what she intends doing about the car,Cheers
What's new
Latest resources
Technical
Part Buying Guide For Newbies
Part Buying Guide For Newbies
Fuse box and fuse locations
Development, chassis, safety, performance & specs
This document will guide you in reading engine data logs from scanners
This Document will guide you in building your own MAF Model and how to read the results.
This document will guide you in hoe to clean your MDK throttle body potentiometers
EMT for Z3's in Great Britain
Latest articles
My car came with a hood cover (sometimes called 'tonneau') that's attached using four Tenax fasteners. These are spring-loaded and grip a ball on a post using three cupped 'fingers'. One of the fasteners was definitely faulty on purchase and I'm pretty sure I damaged another fitting for the...
Purists look away now!
This was a temporary fix for front suspension shock absorbers that are old but functional.
The bump stops on my Z3 1.9 Roadster were missing on one side and completely perished on the other. Missing or non-functional bump stops are not a reason for a MOT failure in the...
My Z3 has an aftermarket JVC radio/CD player, but when bought, the front footwell speakers and the door tweeters didn't work and the rear speakers were wired left to right, right to left.
Initially, I thought the problem with the front speakers was the amplifier relay, which many online posts...
The plastic sill cover (kick plate) is held on by a push-in black clip at the top (visible), one clip at the inside rear and about 6 along the inside bottom. The door rubber sits on the top of the vertical inner part of the sill cover.
When refitting the sill cover, I found that by first...
I bought a Z3 with a broken passenger seatbelt guide (the one mounted on the seat side). The break was about 1cm from the bottom of the guide. This is how I repaired mine.
The broken parts could have been glued together, but since these are a weak design I figured some additional reinforcement...
One of mine was missing from the trim panel next to the alarm LED. Rather than pay high prices second-hand, I decided to make my own.
I bought some 2mm black ABS plastic sheet to do the job, however at the same time I bought a laptop lithium battery pack to use the batteries inside for a job I...
I have just added LED dipped lights replacing the old Halogens and the difference is amazing. The off Side is dead easy but the near side is a pig as the air filter gets in the way. Although I could touch the light I couldn't turn it, so had to remove the air filter. This involves removing the...
I have a feeling that the original design of the Z3 air intake system was dictated more by the space available, rather than engineering considerations. For example, the air filter is smaller than even that of the 8-valve Volkswagen Golf GTI, which is known to be obstructive on even a 1.8 litre...
Hi everyone,
I have now completed the general overhaul of our 2000 year 6 cylinder 2.0 ,only48000 miles from new Z3 ! You may recall the pictures of the mice living in the inner cills when I started the strip down. Well I attach (hopefully !) the completed car, it looks stunning with a new coat...
Latest profile posts
-
Ancient Brewer AlexGSi2000 Ancient Brewer wrote on AlexGSi2000's profile.
Hi Alex, I messaged in June about the instrument cluster you still had. Did you get my message ? Have I missed a reply ?
-
colb mid life crisis colb wrote on mid life crisis's profile.
PM me your mobile number and I will send you an invite to Zedshed Cymru Group on Whats App
Our Rules if Engagement attached for info
Our Rules if Engagement attached for info
-
koolflyer spurs fan in a coupe koolflyer wrote on spurs fan in a coupe's profile.
Hi Andy, I'm looking for a fuel filler pot/gator for my '97 pre-facelift 2.8, have you got one?
Cheers
KF
Cheers
KF
Monthly Running Costs
-
Campaign goal£55.00 of £65.00
Staff online
-
NeRoAdministrator
