Andyboy's latest activity
-
£20 per side, both for £30. The black vertical pillars are unrusty. Collection only, no postage under any circumstances. -
I've said it before and will say it again.......... don't write of BMW as a source for parts, my experience is that 90% of the time they...
-
Im nearly ready to get the sills onto my Z3 and have been getting new clips and bolts for the job. Two of the bolts needed to be grinded...
-
Andyboy replied to the thread Madness- Ebay v BMW costs.Pantri Trading are one to avoid - absolute pisstakers. Other sellers too - I wanted a heater control facia panel for an E36 Compact...
-
Andyboy replied to the thread Bonnet release lever.No need to buy new catches unless you want shiny new stuff. The old ones can be easily fixed - grind off the head of the rivet and the...
-
Andyboy replied to the thread For anyone with Autogearbox rough changes & loss of cruise control.Febi MAF's seem to be Bosch or Siemens with the part numbers and logos ground off. Talking of gearbox issues: I had a 1997 single Vanos...
-
Andyboy replied to the thread For Sale Looking for a Z3 normal differential, NON LSD.Thing is, the LSD in the 2.2, 2.8 and 3.0 is the type 188 and all non LSD units are the smaller Type 168. That means the driveshafts and...
-
Andyboy posted the thread For Sale Unused space saver wheel - new condition £60 in For Sale Section.As above, never been fitted or used. £60 plus postage or collect from Sheffield.
-
-
£10 each plus recorded post. Mainly rears in: Oxford green Topaz blue Black 668 Black cosmos Titan silver Arctic silver Both solid...
-
-
Andyboy replied to the thread No Heat in My 1996 1.9L Z3 – Troubleshooting So Far.OK. Pull the long heater hose (from the bottom of the rad) from the heater stub. Remove the rad cap and slowly pour coolant in until...
-
Andyboy replied to the thread Replacing track rod ends - special tool required?.Stillsons are the perfect tool. Fit new lock washers if fitted and threadlock the new track rod. I always replace the entire track...
-
Andyboy replied to the thread A rare Z in work today..Those 300ZX's were/are excellent. The Mitsubishi 3000GT was a proper weapon as well. A nice example of either is a rare thing now.
-
Personally, if the starter motor is working OK I would leave well alone. My Z3 and E36 are both on well over 140K miles on original...
-
Andyboy replied to the thread Rear axle bushing.It probably wouldn't fail but they need replacing.
